久久91日韩精品无码一区波多野 ,亚洲一级影片在线观看,丰腴熟妇高潮亚洲视频

API pharmaceuticals

Active Pharmaceutical Ingredients (APIs) are the basis of the active ingredients of pharmaceuticals. Their production process often involves complex chemical reactions and separation and purification steps, generating large amounts of wastewater. These wastewaters typically have high concentrations of organic matter (measured by chemical oxygen demand (COD) and total organic carbon (TOC), contain structurally stable and difficult-to-biodegrade API molecules themselves and their production intermediates, and have high chroma, high salt content, and exhibit significant biological toxicity, resulting in generally poor biodegradability (BOD5/CODcr ratio).

Ultraviolet light/hydrogen peroxide (UV/H?O?) combined technology utilizes ultraviolet light of a specific wavelength to irradiate hydrogen peroxide (H?O?), triggering the decomposition of H?O? molecules to produce highly reactive hydroxyl radicals (OH). The strong oxidizing properties and non-selectivity of OH radicals enable them to effectively destroy the chemical structure of API molecules and their complex intermediates, gradually breaking them down into small molecules and eventually mineralizing them into CO2, H?O, and inorganic salts, thereby degrading pollutants.

UV/H2O2 technology demonstrates excellent degradation of a variety of typical APIs, including antibiotics, hormones, phenolic compounds, nitrogen-containing heterocyclic compounds, and some organic solvents (such as dichloromethane (DCM)).

The process flow for UV/H?O? treatment of API pharmaceutical wastewater is as follows:

原料藥API制藥-產品圖.png

UV Hydrogen Peroxide Advanced Oxidation Process: Pretreatment, UV/H?O? Reaction, and Post-treatment

· Pretreatment Stage

Grids and Screens: Remove large suspended and floating solids.

Equalization Tank: Evenly distributes water volume and quality, and buffers pH fluctuations.

Coagulation/Sedimentation/Flotation: Removes fine particles and improves UV transmittance.

· UV/H?O? Reaction Unit

Reactor: Typically constructed of stainless steel or other materials with good UV and H?O? resistance, the reactor is equipped with a UV lamp (either a low-pressure, high-intensity mercury lamp or a medium-pressure mercury lamp).

H?O? Dosing and Control: Hydrogen peroxide solution is precisely dosed to the reactor inlet or reaction zone via a metering pump.

·Subsequent Treatment Stages

H?O? Removal

pH Neutralization and Biological Treatment

Advanced Treatment

Customer Benefits of UV/H?O? Treatment of API Pharmaceutical Wastewater:

Improves and Controls the Wastewater's Biodegradability (BOD?/COD?) Ratio

Rapidly Reduces Wastewater Biotoxicity

Ensures Production Continuity and Easily Achieves Regulatory Compliance

Empowers Green Pharmaceutical Manufacturing

Reactivity and Easy Control and Operation

Low Overall Operating Costs

High Process Operational Flexibility

Previous
Pesticide Industry

Next
Chemical waste salt purification

Related Products

Clear Medium Pressure UV Disinfection System

The ONYX-Clear-SZ in-line medium-pressure UV sterilizer utilizes medium-pressure multi-spectral UV lamps to not only destroy DNA/RNA but also intracellular enzymes and proteins, resulting in more thorough sterilization. It is designed to disinfect and degrade toxic micropollutants in water, including NDMA, 1,4-dioxane, endocrine disruptors (EDCs), pesticide residues, cyanobacterial toxins, GSM (geosmin), and 2-MIB (dimethylisoborneol).

In addition, combining oxidants such as O? and H?O? with UV light, such as UV-O? and UV-H?O? processes, can be used to oxidatively remove recalcitrant substances and organic matter, such as CC14 and polyaminobiphenyls, from wastewater.

MOM Ceramic Plate CD Ozone Generator

The MOM series of large ozone generators feature a highly efficient plate-type ozone generation system, a simple, high-end modular assembly design, a stable power supply system discharge module, a uniform discharge module cooling unit, sophisticated porcelain dielectric processing, and convenient construction and installation to ensure optimal ozone concentration and efficiency. These devices offer low energy consumption, high concentration, high power density, high reliability, ease of use, and intelligent functionality. They are widely used in drinking water treatment, reclaimed water and wastewater treatment, aquaculture and aquatic product processing, swimming pool disinfection, industrial oxidative bleaching, and landfill leachate treatment.

UV-AOP Advanced Oxidation

Ultraviolet Advanced Oxidation Process (UV-AOP) is an environmentally friendly technology that uses ultraviolet radiation to trigger oxidation reactions. Its core principle is to use UV light to excite oxidants to generate highly oxidizing free radicals, which in turn degrade organic and inorganic pollutants. UV-AOP is characterized by high efficiency, environmental friendliness, and zero secondary pollution. UV-AOP systems can be categorized into various types depending on the type of oxidant, the most common of which include UV/hydrogen peroxide, UV/ozone, and UV/chlorine.

ONYX-Clear-SZ-AOP can serve as the UV light source for UV-AOP. This UV-AOP system can be used to degrade toxic micropollutants such as nitrosodimethylamine, 1,4-dioxane, endocrine disrupting chemicals (EDCs), pesticide residues, cyanobacterial toxins, GSM (geosmin), and 2-MIB (dimethylisoborneol).

UV Photolysis

UV photolysis generally refers to the use of ultraviolet (UV) light to decompose substances, particularly pollutants.

Specific wavelengths of UV light (usually short-wavelength UV-C, such as 254 nm) can directly break the molecular bonds of certain substances (especially organic pollutants), causing a cracking reaction that breaks them down into smaller molecules, free radicals, or ultimately mineralizes them into CO? and H?O. This is known as direct photolysis. It is primarily used for TOC removal in ultrapure water, residual chlorine removal and disinfection prior to RO membranes for purified water, and the decomposition and disinfection of ammonium chloride in swimming pools and water features.

Municipal Municipal Wastewater Municipal water supply Recycled Water Reuse Township water supply and drainage Industrial Park New pollutant control Water ecological restoration project

Industry Pretreatment of industrial high-difficulty wastewater Pesticide Industry API pharmaceuticals Chemical waste salt purification Food & Beverage Industry Pharmaceutical Purified water Chip Fabrication Oilfield reinjection water Industrial zero emissions

Commercial Secondary water supply Pool & Aquarium High-quality drinking water POE/POU Aquaculture Cooling Circulating water Laboratory applications

UV-AOPs Wastewater Biodegradability Pretreatment of highly toxic industrial wastewater Chemical active agents Cyanide Organic Complexes

Craftsmanship UV disinfection UV photolysis UV Advanced Oxidation Reverse Osmosis Alternative to pasteurization UV photochemical reaction Ozone oxidation

Resource Recycling waste plastics Construction waste Renovation waste

Municipal WSH UV Disinfection System WTV UV Disinfection Vertical System ZL UV Disinfection System Clear Medium Pressure UV Disinfection System MOL Ceramic Plate CD Ozone Generator UV-AOP Advanced Oxidation System D.FITE Cloth Filter

Industry ZL UV Disinfection System Clear Medium Pressure UV Disinfection System UV-AOP Advanced Oxidation Extrem Medium Pressure UV Disinfection System EX-U UV Sterilizer EX-UPW-TOC UV TOC System MOM Ceramic Plate CD Ozone Generator MOS Ceramic Plate CD Ozone Generator UV-Fenton UV-Oxidation

Commercial EX-L UV Sterilizer EX-U UV Sterilizer ZL UV Disinfection System CLEAR Medium pressure UV Disinfection System OneUV UV Sterilizer Extrem Medium pressure UV Disinfection System UV-AOP Advanced Oxidation MOS Ceramic Plate CD Ozone Generator COG Ceramic Plate CD Ozone Generator

Photochemistry UV-Fenton Medium-pressure UV-Oxidation UV Photolysis Pasteurization UV Alternatives UV Photocatalysis Low Pressure UV-Oxidation

Resource Recycling AI Optical Sorter Al high-speed sorting robot AI heavy-duty sorting robot

Others SATBR Integrated Wastewater Treatment System D.FITE Cloth Filter Modular Wastewater Treatment System ModuOzone Ceramic Plate CD Ozone Generator

After-Sales Services Spare parts replacement Product Repair System Support Renovation Regular maintenance Software Upgrade

Technical Support Process Support Product Training Research & Development Small Test Pilotscale experiment Online dose monitoring UV dose design

Channel Services Municipal Industry Business OEM

Spare parts Low Pressure lamps Low Pressure Amalgam Lamps Medium Pressure Mercury Lamp VUV Low-pressure Mercury Lamp（185nm） Quartz sleeve Ballasts UV Intensity Sensor UV transmittance tester Sealing accessories Other Spare parts replacement

Industry Applications

Related Products

About Us

Applications

Products

News

Services

Resources

Contact us